ECI/PBI Connection

This is a place to request and discuss builtin features of the 1090XLR expansion box
Forum rules
Rules for RFCs

1. This is not a method to report an error. There's a forum for that elsewhere on the site.
2. Keep request to a specific single item. No everything including the kitchen sink requests.
3. Determine if it is a need or a want. Rationalize that need....a need will have a higher priority over a want.
4. Always be aware of the intersection of cost, space and function.
5. Don't forget to build on what's gone before. Don't reinvent the wheel, modify it for the most benefit, not just this one thing.
6. Don't paint yourself into a corner and try not to build on something that is still shaking.
7. Pictures and links to information are always valuable.
8. Be aware that some will like and some will hate your RFC. That's okay. They are okay too.
Post Reply
mega-hz
Posts: 2
Joined: Tue Oct 10, 2017 1:36 pm

ECI/PBI Connection

Post by mega-hz » Tue Oct 10, 2017 1:48 pm

I saw the photos of the ECI/PBI Adapter PCB, i would rather prefere a very small PCB for use as a "ECI/PBI Plug" with a nice Cable to the 1090!
Any PCBs on the Back of the XEs will be too unsafe for good connections!
The Cartridge Port could also go into the 1090!

Wolfram

Post Reply